Search Results (4.9M)
Conversation Type :
All
Published Date :
Lifetime
Community Accepted Solution
Official Solution
We have recently purchased 6 Vostro desktops in our office with Windows 10 (64) Home, Core i3 9100 CPU 3.6 GHz, with 4 GB ram. Every time after booting up, they all have 100 percent disk usage for about 30 minutes. PCs lag this entire time. This happened even before installing the necessary software
Question
•
Vostro Desktops
Community Accepted Solution
Official Solution
Will Dell part# 03THTT (600W 80 Plus Platinum) power supply work in a PowerEdge R640? I have searched around online and can't find anywhere that listed the R640 on compatible models. Would greatly appreciate if anyone knows for sure.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
i hi sir my name is Ali Husnain I lost my laptop yesterday I need to recovering my laptop my laptop Model No : Latitude 5520 And ST no ***private info removed*** Please give me response
Question
•
Customer Care
Community Accepted Solution
Official Solution
Hello, I am having an issue with our primary server's RAID configuration. This is a Windows 2022 Server that I setup a few years back, and I thought I set it up as a RAID-1 mirror with 2 physical hard drives. I had not checked the RAID logs in the last 2 years due to some health issues; but I am cur
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Other than the backplane (N9YVX) do I need completely different nodes or can I just get a server card (VNFMF) and a cable (X50KP) for each node? Thanks!
Question
•
Rack Servers
Community Accepted Solution
Official Solution
I have an Optiplex 7060 SFF (mini tower) with the BIOS udated at 1.14. I had to check for the RAM model so I opened the cover/tower, and upon the next boot, the BIOS did not reported that the cover has been opened during POST, as I was expecting it. The feature is enabled is the BIOS and it was
Question
•
Optiplex Desktops
Community Accepted Solution
Official Solution
We have an R660 with an S160 controller installed and the drives are in a RAID volume Is it possible to have visability of the S160 software controller and the drives in the RAID on the iDRAC web interface? iSM is installed and Dell-VMware ESXi There are no hardware issues here just asking to see
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Hi, We have on a customer some switchs Dell S3124F-01-FE-28 (version 9.13(0.3). It's connected with Cisco switchs where I see outbound drop. But on the dell Switchs, I don't see discarded packets on output interface but in the input interfaces: Input Statistics: 4955893560 pac
Question
•
Networking General
Community Accepted Solution
Official Solution
Hello all, I have installed the SCG application and added a few PowerEdge iDRACs. Also I have installed ISM agents on the servers. The devices are shown as connected and their monitoring is enabled in SCG. So they seem to be fine. Now I need to ensure if the automatic case creation works as expecte
Question
•
Secure Connect Gateway
Community Accepted Solution
Official Solution
Hi Team, I;m currently using below raid controller card. Slimline SL1 Broadcom / LSI PERC H965i Front 24 GT/s RAID 8.8.0.0.18-26 Question Is below firmware compatible with this card ? Dell Support – Firmware Version 8.11.2.0.18-26 Thank you&nbs
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Request for Unlocking Quotes for BIH During the preparation of our tender dossier, we have encountered a situation where information has been leaked. To ensure transparency and fairness in the bidding process, BIH requests that Dell unlock all Purchase Orders (POs) listed under the name EU as BIH.
Question
•
Rack Servers
Community Accepted Solution
Official Solution
Hi, After putting the wrong config regarding SSL certificate now the apache subsystem will not start. In the logs it says:"There was a problem veryfing the Apache config: AH00526: Syntax error on line 1 of /usr/local/etc/apache24/Inclues/ssl-hostnames.conf"I am connected to my SC through USB<-&g
Question
•
Compellent
Community Accepted Solution
Official Solution
Hi guys, Kindly looking for some support with an issue I'm running into with my R6515 10 Bay NVMe server. I'm utilizing an Intel E810-XXV Dual Port 10/25GbE SFP28 PCIe adapter (CD16M) and running into some errors. Typically happens when PXE booting fails. "A bus fatal error was detected
Question
•
Rack Servers
Community Accepted Solution
Official Solution
Today, I update 7760 with BIOS v1.10.1. First, I download and excute .exe file, but get error message "Unable to lauch UI module". Then, I download and save .rcv file into a USB key and perform following steps, shutdown, unplug the power cable, press ESC and Ctrl simultaneously, plug the power cable
Question
•
Precision Mobile Workstations
Community Accepted Solution
Official Solution
S/N: CN-0RVC21-74261-38V-2HFU
Question
•
Monitors
Community Accepted Solution
Official Solution
I am trying to use a proxy server to enable the use of SupportAssist but I am unsure of the URLs needed to be whitelisted.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Good morning, nice Dell community! The context: I have a dell boss s-1 card which is to be installed into a dell r640 server. The problem: the card has a full profile bracket. The question: do you know if it is possible to order the low profile bracket for the boss s-1? best regards, Dmitry
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Looking for the PCIE retention clips for Dell R740. They seem to fall out and get lost easily, and I'd like to see if there's a part number for them and where/how to order them. Thank you!
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Official Solution
Closed
Hello, after a sever reboot and loss of configuration, the server lost its idrac license and doesn't even have express. I have re-registered the server under us transferred ownership. It's an older R320. Unfortunately I have nothing in digital-locker. How should I proceed? Thank you.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Official Solution
Hello, I am trying to reset the password on a Dell PowerConnect M6220. I can login to the CMC via the https webpage but dont see how to do it from there. So I am trying to plug in a USB serial cable into the console port and reset the password via a console session using teraterm but when i
Question
•
Networking General

