1 Rookie
•
2 Posts
0
61
February 28th, 2025 11:45
dell boss s-1 low profile bracket
Good morning, nice Dell community!
The context: I have a dell boss s-1 card which is to be installed into a dell r640 server.
The problem: the card has a full profile bracket.
The question: do you know if it is possible to order the low profile bracket for the boss s-1?
best regards,
Dmitry
No Events found!
DELL-Charles R
Moderator
•
4.4K Posts
0
February 28th, 2025 16:01
Hello,
I do not see a part number for just the low profile bracket on a BOSS.
You may contact Sales and check on that.
I see this as the latest BOSS for R640 with low profile bracket
Part #:61F54
Part Desc.:ASSY,CRD,CTL,BOSS.S1V5,SATA,LP
ASSY Controller Card, PCI-E 2.0 x2 Lanes, RAID-1, Up to 2 M.2 SATA Drives, SATA, 2x SATA, Hardware RAID, BOSS-S1 Adapter, Low Profile
DELL-Joey C
Moderator
•
3.9K Posts
0
June 17th, 2025 05:33
Hi,
For the BOSS card, the full and half height brackets are not sold separately. If I'm not mistaken, only network cards do have both brackets provided in the box. I did go to the lab to check on NIC card brackets, they aren't the same hence you can obtain spare from your stock stash. I also checked the PERC card bracket. It seems to have the same placement. If you need to source for spare online, here's the DPN# 2G2R5 for low profile and 8KYYM for full height bracket. But this is based on my research on BOSS-S1 and PERC H730 card in the lab.
Jibbs4KSU
1 Rookie
•
1 Message
0
June 17th, 2025 02:40
So, did you find a solution? Looking at the same exact thing myself.