1 Rookie
•
14 Posts
0
60
January 13th, 2025 18:18
Connecting a PowerVault MD1400 to OpenManage Enterprise.
Hello,
As the subject states, I am trying to connect a PowerVault MD1400 to OpenManage Enterprise 3.10. The server to which it is attached has been discovered and displays all information from the server side without issue. The issue is when looking at the Update Firmware page in OME, all of the drives and other hardware within the PowerVault all show a question mark, so I am unable to verify whether or not this hardware needs any updates.
I tried adding a Storage/SNMP discovery task to OME but it failed. SNMP IS enabled on the server and configured in the alerts section on OM Server Administrator. Note the MD1400 array and its disks are all listed and displayed as expected in OMSA.
How do I manage this hardware?
Thanks,
Chris
DELL-Young E
Moderator
•
5.1K Posts
0
January 14th, 2025 03:37
Hello Chris, thanks for choosing Dell and welcome to our community.
I'm afraid I do not see MD1400 on support matrix.
https://dell.to/3BWXgQ9
Respectfully,
Hajdh
1 Rookie
•
2 Posts
0
June 29th, 2025 02:46
@DELL-Young E vendors
Hajdh
1 Rookie
•
2 Posts
0
June 29th, 2025 02:46
Ben bu bilgisayara Windows yapıyorum
DELL-Young E
Moderator
•
5.1K Posts
0
June 29th, 2025 23:26
Merhaba, size daha fazla yardımcı olabilmemiz için karşılaştığınız sorunlar hakkında bana daha fazla bilgi verebilir misiniz? İsterseniz servis etiketinizi DM ile bize gönderebilirsiniz. Ayrıca, sorunuz bir masaüstü veya dizüstü bilgisayar ile ilgiliyse, soru başka bir sayfada bırakılmalıdır. Lütfen ziyaret edin https://www.dell.com/community/en/categories/laptops