Skip to main content
Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

rmarcosmw

2 Posts

144886

June 2nd, 2014 07:00

NIC Adapter on the provisioned Desktop are not mapping accordingly

Hi Experts,


i'm new in vworkspace and these are my environment:

Server A:

Windows 2012 R2 64bit Data Center Edition

vworkspace 8.0 MR1 (demo purposes)

Server B:

Windows 2012 R2 64bit DC Edition

Hyper-V

I have configured the desktop provisioning, and did successfully managed the diffdisk clone via hyper-v.

but somehow the provisioned desktop, are not mapping to the virtual switch adapter as hope.

I must manually mapped the NIC to its network adapter via hyper-v to get the "logged off" status in vworkspace.

 I attached screenshot.

after i mapped the NIC it work well in vworkspace, this below screenshot is what i did:

how come? anyone having the same problem?

Thanks

Marcos

DELL-Mike H

11 Posts

June 2nd, 2014 10:00

Hi Marcos, Did you make changes to your template and then use the "update" option in the add computers wizard? If so, you need to use the "import" option to bring the template hardware settings across. You will need to check Existing/Invalid to see the template. I would imagine that the other issue you have posted about is due to the machines not being created properly. Once you have it setting the network settings properly, recreate the machine and you should not see the error. Regards Mike Hatch

Was this post helpful?

View All

No Events found!

Top