This post is more than 5 years old
1 Rookie
•
10 Posts
1
1561
September 10th, 2015 12:00
VNX 5300 Cabling Video
Hello,
Getting a new VNX 5300 Block. Never cabled myself and wondering if there is a VNX 5300 cabling Video out there which I can use as a reference? I could not find any VNX Cabling video anywhere.
Thank you in advance.
Rohail
No Events found!
khanz1
2 Intern
•
136 Posts
1
September 10th, 2015 20:00
Hi Rohail,
You can use the VNX5300 installation guide which has step-by-step instructions on how to cable and install the system. Try this link or visit the VNX Documents page and navigate to VNX Series->Install VNX1 or VNX-VSS Series->Install VNX->(Select VNX5300 and VNX for Block) - this will generate the installation guide for you.
brettesinclair
2 Intern
•
715 Posts
0
September 11th, 2015 01:00
In addition to what Zeeshan has shown, the hardware guide also has a thorough section on cabling, beginning on page 85
https://support.emc.com/docu41761_VNX5300-Hardware-Information-Guide.pdf?language=en_US
Rainer_EMC
4 Operator
•
8.6K Posts
0
September 11th, 2015 02:00
Please see the hardware installation guide