1 Rookie
•
21 Posts
0
411
November 27th, 2024 15:57
visio stencils for vnx and recoverpoint
Every single google search that leads to people asking for visio stencils on the dell forums (every single one) has broken links.
Where are the visio stencils for all this gear? support.emc.com isn't a thing anymore.
I'm looking for visio stencils specifically for vnx 5400, and recoverpoint servers.
basically the EMC VCE vBlock stuff.
Visio stencils for this stuff just do not seem to exist. Yes, I've already tried visiocafe. the VNX stuff isn't on there.
No Events found!
DELL-Josh Cr
Moderator
•
9.2K Posts
0
December 2nd, 2024 15:34
Should be there now
DELL-Josh Cr
Moderator
•
9.2K Posts
0
December 2nd, 2024 15:36
I uploaded it to your google drive
DELL-Josh Cr
Moderator
•
9.2K Posts
0
December 2nd, 2024 14:06
Hi,
Thanks for your question.
Try this for VNX https://dell.to/3CRrLa1 I don’t see any for recoverpoint.
Let us know if you have any additional questions.
lanman9000
1 Rookie
•
21 Posts
0
December 2nd, 2024 15:05
nope, doesn't work. I'm not sure why you need to log in to get visio stencils. What is so secret about these?
DELL-Josh Cr
Moderator
•
9.2K Posts
0
December 2nd, 2024 15:14
I sent you the file directly.
lanman9000
1 Rookie
•
21 Posts
0
December 2nd, 2024 15:16
can you just post it here? The MS link is wanting me to set up all sorts of MFA and email verification. I just can't believe these aren't public.
DELL-Josh Cr
Moderator
•
9.2K Posts
0
December 2nd, 2024 15:20
It is too large, 70MB and largest upload is 10.
lanman9000
1 Rookie
•
21 Posts
1
December 2nd, 2024 15:24
here is a link to my g-drive, you can upload it here.
I'll edit my post and remove the link once the file is there.
https://drive.google.com/drive/folders/13Wyzwt92tTxtCJsLq7Z7P-ADrRVjopPl?usp=sharing
clkjszolidxufilsdjhnflaksdjf
1 Rookie
•
1 Message
0
July 16th, 2025 19:16
is there one for the VNXe3200?
DELL-Josh Cr
Moderator
•
9.2K Posts
0
July 16th, 2025 19:23
Try this https://dl.dell.com/downloads/579XT_VNX-Visio-Stencil.zip