This post is more than 5 years old
1 Rookie
•
12 Posts
0
2157
March 17th, 2016 09:00
SNMP traps for VNX2
Hello. Does anyone have a document that lists the SNMP traps for a VNX2? My customer would like to have a complete list of the traps that can be enabled to be sent to their NetCool network management system.
Thanks,
Mike Moore
No Events found!
moorem10
1 Rookie
•
12 Posts
0
March 18th, 2016 12:00
Karl, thanks for the information. Very helpful.
umichklewis
3 Apprentice
•
1.2K Posts
1
March 18th, 2016 08:00
The VNX MIB lists the traps, but these are the FIbreChannel Alliance traps only. They're very generic and don't provide much detail. If you load the MIB (which is on the control station), you can snmpwalk the VNX storage processors and data movers and see how little data you get.
EMC provides the most useful information in their APIs, leveraged by products like VNX Monitoring and Reporting. If your customer wants useful data, they'll need to leverage an EMC product for data collection.
You can see a more detailed discussion about this in an older post here on the EMC Community Forums.
Let us know if that helps!
kelleg
4.5K Posts
0
March 21st, 2016 09:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen