This post is more than 5 years old
2 Intern
•
309 Posts
0
748
March 2nd, 2016 13:00
Direct Connect IBM 3650 M3 to VNX5400
Hello,
I currently have some IBM hosts direct connected to a CX4-120 (NS120). Back in the day I had to have EMC do an RPQ for this configuration. I now must swap the CX4 with a VNX5400. I still need to direct connect as I don't have SAN switches. I created a query in the interoperability matrix but I'm not coming up with any queries that show direct connect. Should I be looking somewhere else for a config like this or do I need another RPQ? Trouble is, I don't have time to wait for a month and a half for this testing.
Thanks.
No Events found!
dynamox
9 Legend
•
20.4K Posts
0
March 2nd, 2016 19:00
if you can find the adapter in the matrix you should be good to go. We have a couple of HP servers connecting directly to VNX5400 (GE PACS Imaging solution)