Start a Conversation

Solved!

Go to Solution

1 Rookie

 • 

10 Posts

1407

October 14th, 2021 19:00

Could not setup private IP as Unisphere IP

When I set on private IP 192.168.101.88/255.255.255.0/192.168.101.254 as the Unisphere IP,

I got one Unexpected Error, The Error Code is 0x3400003.

The OS version is 3.1.15.10216415.

Thanks in advanced !

 

EMC_error_20211015.png

Moderator

 • 

7.6K Posts

October 18th, 2021 08:00

Hello perlang,

Here is the link for vnxe systems. https://dell.to/3jd8enV

Moderator

 • 

7.6K Posts

October 15th, 2021 15:00

Hello perlang,

Here are a few links that maybe of assistance.

https://dell.to/3DIppWg

https://dell.to/3n13Id8

1 Rookie

 • 

10 Posts

October 17th, 2021 23:00

Thank DELL-Sam L !

But my Storage is VNXe3200.

1 Rookie

 • 

10 Posts

October 19th, 2021 18:00

Thank DELL-Sam L !

I had reconfigured the Management IP address via ssh-CLI,

06:11:36 service@(none) spa:~> svc_initial_config -4 "192.168.101.88 255.255.255.0 192.168.101.254"
Validating address 192.168.101.88 format ... Pass
Validating address 255.255.255.0 format ... Pass
Validating address 192.168.101.254 format ... Pass
Validating IP and Gateway subnet with Mask ... Pass
Successfully configured network with parameters
06:11:56 service@(none) spa:~>
 
After that , I got the Knowledge Base Article  000094863, from which my operation was risk of " PERMANENTLY PREVENT YOU FROM CONNECTING."
 
Why EMC provide svc_initial_config command in CLI ?

Moderator

 • 

7.6K Posts

October 20th, 2021 08:00

Hello perlang,

You only want to reconfigure via CLI as the last option if all other methods don’t work first.  Also if you are going to reconfigure via CLI then it is best to open a support ticket first so that we can be on the line to ensure that there is no issues with the reset and you don’t get locked out.   

No Events found!

Top