This post is more than 5 years old
15 Posts
0
2877
October 22nd, 2015 21:00
Configuring Call-home for VNX without ESRS
Hi All,
I'm doing my reading on ESRS, I see that it is required to have a server to perform monitoring. Currently I have one customer who has VNX5600 block only. They specifically stated that they don't want to have an extra server for monitoring and email home alerts.
Is there a way to configure email home without ESRS for VNX5600 Block Only?
Can I deploy SNMP without ESRS?
Thank you all for your help.
No Events found!
brettesinclair
2 Intern
•
715 Posts
0
October 23rd, 2015 18:00
Hi,
You can use the call-home to send email notifications. In Unisphere, go to the System tab, then into Monitoring & Alerts and then Notifications. There's topics in the in-built help to detail.
However, give some thought into using the on-array builtin ESRS functionality. Thich sets up the ESRS agent on the Storage Processors allowing access over HTTPS when required.
https://support.emc.com/docu48473_EMC-Secure-Remote-Support-for-VNX.pdf?language=en_US