This post is more than 5 years old
4 Posts
0
1914
November 18th, 2016 13:00
Can't edit notification Templates for Unisphere
Hi all,
I am trying to update the notification templates for my VNX systems via Unisphere.
Unfortunately, My only option is to create new or create from another template. I can't edit or delete any templates from the system.
I need to fix this. Is anyone aware of the issue or a workaround for it?
Thanks,
-Bill
No Events found!
pchassang
33 Posts
0
November 18th, 2016 14:00
Hi bill,
You need to become in engineering mode (ctrl + shift + F12) but i think i am not autorize to give you the pass code :(
Regards
Pascal
billc.murphy-rsa.com
4 Posts
0
November 19th, 2016 11:00
Hi Pascal, where would I input t that key combo? on the sp or on my Unisphere system, etc?
Thanks,
-Bill
pchassang
33 Posts
1
November 19th, 2016 11:00
When you navigate through Unisphere interface, you have just to enter this combo of key and a window appear. Enter the passcode.
After buttons will not greyed also.
billc.murphy-rsa.com
4 Posts
0
November 19th, 2016 12:00
Hi Pascal, I have found how to access the eng mode but when I put in the passcode nothing happens. no authentication error or message at all.
brettesinclair
2 Intern
•
715 Posts
1
November 19th, 2016 18:00
If you've entered the correct password, the "Mode:" in the screen footer will change to say Engineering.
billc.murphy-rsa.com
4 Posts
0
November 20th, 2016 08:00
Thanks Pascal, for whatever reason it did not work yesterday, but it did today!
Thanks Brett, I wasn't sure if I was doing it wrong until I saw the "engineering mode" footer!
Thank you both for the info, you just saved me ALOT of time!!
**for anyone who runs into the this problem, The passcodes are out there to find if you need them.
-Bill