1 Rookie
•
108 Posts
0
662
August 25th, 2022 10:00
VPLEX Host type
Hi,
I have a Unity 680F that I zoned into the backend of a VPLEX VS2 running code version 6.2. The VPLEX initiators show up on the Unity and vice versa. I want to add the VPLEX initiators to a host I define in Unity, but I'm not sure which OS I should pick for it. Any help would be greatly appreciated.
Thanks,
Thom
No Events found!
DELL-Sam L
Moderator
•
7.5K Posts
0
August 29th, 2022 08:00
Hello ThomDaleyPPI,
This article should be what you need.
https://dell.to/3pSuYMX
DELL-Sam L
Moderator
•
7.5K Posts
0
August 26th, 2022 01:00
Hello ThomDaleyPPI,
Here are some links to some kb’s as well as some best practice guides that can be of assistance for you.
https://dell.to/3Ra03r1
https://dell.to/3Rdzhhk
https://dell.to/3Cx5NqC
https://dell.to/3KkVrMA
ThomDaleyPPI
1 Rookie
•
108 Posts
0
August 29th, 2022 05:00
Hi Sam,
Thank you for getting back to me. I looked through this and couldn't find the host type for a VPLEX on Unity so I didn't set the OS.
--Thom
ThomDaleyPPI
1 Rookie
•
108 Posts
0
August 29th, 2022 08:00
This is exactly what I was looking for! Thanks Sam!
--Thom