1 Rookie
•
16 Posts
0
45
March 13th, 2025 16:16
R410 can't see individual disks after doing raid 1 on disk0 and 1
hi, I have poweredge r410 with 4 disks. went into PERC and configured raid1 using first 2 disks. I installed proxmox on the new disk. when I logged into the system's OS and do lsblk, I only see the virtual disk, I do not see the physical disks 3 and 4. Was there a setting in the PERC that I needed to see the 2 individual disks 3 and 4?
No Events found!
DELL-Charles R
Moderator
•
4.4K Posts
0
March 13th, 2025 20:46
Hello,
Try making those remaining drives as a single drive RAID0 in the controller bios and check results.
I'm not familiar with proxmox as we don't have that validated OS .
dltechAce
1 Rookie
•
2 Posts
0
March 13th, 2025 17:07
Thats how dell RAID controller's work. they manage the drives, and you can only see the virtual disk in the OS.
jchang69
1 Rookie
•
16 Posts
0
March 13th, 2025 19:53
@dltechAce ok, so you saying the other 2 disks are not available at all? that can't be.
jchang69
1 Rookie
•
16 Posts
0
March 13th, 2025 21:25
@DELL-Charles R interesting, will do and report back next week. thanks.
jchang69
1 Rookie
•
16 Posts
0
March 18th, 2025 15:37
@DELL-Charles R making the remaining single drive into raid0 did the trick.
thank you.