This post is more than 5 years old
1 Rookie
•
16 Posts
0
830
February 13th, 2012 01:00
srdf-a between dmx's
Is it possible to create and activate two simultaneous srdf-a sessions on different groups between two dmx's?
Primary site: DR Site:
R1 -> R2 group1
R2 <- R1 group2
No Events found!
RobertDudley
2 Intern
•
448 Posts
1
February 13th, 2012 11:00
If both arrays are a source and a target at the same time its called bi-directional SRDF and EMC does not recommend running in that configuration with SRDF/A. The recommendation would be to use a set of directors for each group. Performing a personality swap isn't affected by the director count.
RobertDudley
2 Intern
•
448 Posts
1
February 13th, 2012 08:00
yes you can and it is recommended that you use different directors for the groups.
darko1980
1 Rookie
•
16 Posts
1
February 13th, 2012 10:00
can these be the same srdf directors? is it possible to change direction of replication eg source symm to become destination symm, to perform so called 'personality swap' for srdf-a session(group)?