This post is more than 5 years old
125 Posts
0
1959
November 16th, 2010 08:00
SMC Installation
I have to do an Symmetrix Management Console, Installation on a windows box, can some one tell the dependencies..like do we need to Install the Solutions enabler first and then SMC..How the actual steps and the order it should be done ?...like getting installation .exe..downloading where to get....once Installed like how is the initial setup done..and things to consider..I tried to read one installation doc on Powerlink, still I want to know actual use cases...This will be managing One Vmax array for now..
No Events found!
sauravrohilla
859 Posts
0
November 16th, 2010 09:00
Hi,
You can follow these steps to install SMC:
1) Install SE
2) Present atleast 6 GK devices to it.
3) Install the appropriate licenses (You will need SMC license also)
4) Discover the Symm in SE using symcfg discover
5) Download the SMC from powerlink ( make sure that you install the right version of SE which is compatible with SMC)
6) Install SMC.
7) To manage VMAX through SMC, default user "smc" should be added to symauth database in VMAX.
You can also refer to
EMC® Symmetrix® Management Console
Version 7.1
Installation Guide
Thanks,
Saurabh
sauravrohilla
859 Posts
1
November 16th, 2010 09:00
From SMC Installation Guide 7.1 Page 11:
SMC V7.1 has the following perquisites:
◆ Solutions Enabler V7.1 (minimum) must be installed.
Note: The SMC InstallShield wizard will fail if the proper level of Solutions Enabler is not installed on the host.
You can check the respective installation guide and check the prerequisite.
Thanks,
Saurabh
SAN_AK
125 Posts
0
November 16th, 2010 09:00
Can I know where do I look up the right versions of the SMC for the SE that they are compatible ?
john1214
1 Rookie
•
44 Posts
1
November 22nd, 2010 07:00
I am too having similar tasks and I need some clarifications on SMC install on windows. As far as my understanding go
1. Install Solutions Enabler on a Host
i) zone host to vmax
ii) instal solutions enabler and Present atleast 6 GK devices to it.
iii) add required lisence using symlmf
iv)discover VMAX using command symcfg discover
v) set variable path ( can you tell me how to set variable path on windows)
I know where to add path on windows but not sure on the variable and path values to add.
2. Install SMC
select local/remote & port to use 7443/7070.
Please let me know if I am missing anything here.
Message was edited by: john121
john1214
1 Rookie
•
44 Posts
0
November 22nd, 2010 09:00
sorry, typo error
yea it is 8443 not 7443
john1214
1 Rookie
•
44 Posts
0
November 22nd, 2010 09:00
and reg setting environment variables in windows?
sauravrohilla
859 Posts
0
November 22nd, 2010 10:00
if its not client server model then u dont need to set anything.