This post is more than 5 years old
32 Posts
0
796
April 18th, 2013 06:00
How to change the alert policy in Unisphere for Vmax.
Hi ,
I have a question regarding the policy creation of Unisphere for V-max frame
Is there any way of changing the policy over the Unisphere .
No Events found!
SYMCLIGuy
98 Posts
0
August 19th, 2013 07:00
Apologies, I read the question too quickly and assumed FAST VP because you mention FAST VP. Now I see it is related to alert policies.
These can be changed in Unisphere. From the main dashboard , click on Administration in the lower righ-hand corner. Then select Alert Settings, followed by Alert Policies.
Hope that helps.
christopher_ime
2K Posts
0
August 16th, 2013 23:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Symmetrix Support Forum" which would be the most relevant for this question.
Seeing though that over 3 months have elapsed since you posted, maybe you have already found the answer (possibly opened up a ticket with support)? If so, once relocated, consider sharing the resolution and also marking the question as "Answered" so that it can help others that have the same question. If not, once relocated, it will then have more visibility by the community of dedicated customers, partners, and EMC employees that are eager to assist.
SYMCLIGuy
98 Posts
0
August 19th, 2013 07:00
Yes, FAST VP is fully manageable from Unisphere for VMAX. Take a look at the "Implementing Fully Automated Storage Tiering for Virtual Pools (FAST VP) for EMC VMAX Series Arrays" available on support.emc.com. If contains screenshots and decscriptions of all FAST VP related functions within Unisphere.