This post is more than 5 years old
165 Posts
0
430
February 16th, 2009 08:00
Question about FCC agent
Hi
does any one know what are the conditions to set the tressholds
I have configure for
conectivity device status change
conectivity port status change
port link status change
the following tresholds:
fatal =5
Critical=4
Warning=3
Minor=2
Information=1
Let me tell you that I have Cisco and Brocade Switches.
I don't know it these values are the good ones for my alerts?
Regards
does any one know what are the conditions to set the tressholds
I have configure for
conectivity device status change
conectivity port status change
port link status change
the following tresholds:
fatal =5
Critical=4
Warning=3
Minor=2
Information=1
Let me tell you that I have Cisco and Brocade Switches.
I don't know it these values are the good ones for my alerts?
Regards
No Events found!
malisetty
21 Posts
0
February 16th, 2009 22:00
From ECC Console-ECC Help -
You can get a very good idea on the alerts related to FCC agent and other terminology
Few Interesting topics from ECC help-contents-Alert Descriptions
Fibre Channel Connectivity Agent Alerts
Understanding trigger values and alert severity levels
Regards
Pawan Kumar.M