This post is more than 5 years old
2 Posts
0
3904
July 5th, 2017 10:00
Powervault MD3600 failed HD
We have a Powervault MD3600 with a failed HD in a 6 drive virtual disk. I have replaced the failed drive but it is now listed as UNASSIGNED. How do I assign it to an existing virtual disk? I have another pending failure disk and I can find instructions for failing it but I am not able to locate any help for a drive that is already failed. Normally in a RAID 5 I would expect a new drive to be added to the RAID group and automatically begin to rebuild but that hasn't happened.
Thanks -
No Events found!
mshisko
2 Posts
0
July 12th, 2017 10:00
Thank you. Problem resolved.
Mike
Mike Shisko
Director, Information Technology
Hitachi Consulting
Work: +1.214-665-6868
Mobile: +1.214-906-5809
isakats
141 Posts
0
July 7th, 2017 05:00
Hi mshisko,
This forum is for ViPR SRM, which is a monitoring platform, you should post this question on the Storage forum.
Regards,
Isaka
fredde1
120 Posts
0
July 12th, 2017 10:00
Hey mshisko
You could try posting your question to the following link:
http://en.community.dell.com/support-forums/storage/f/1216
Thanks
Tim