This post is more than 5 years old
20 Posts
0
746
July 23rd, 2010 03:00
Performance Manager -- VMAX
Hi
Trying to analyze performance data for Symmetrix VMAX with ControlCenter 6.1 UB5 found several issues:
- Incorrect values for "Sampled Device Read/Write Response Times". This issue is corrected updating SE with 7.1.1 MRLK published on July 7th. This is right for me and will update shortly.
- Empty values for "Disk Directors Utilzation", "Disks Utilization", "Top Ten Disks", etc... and several metrics. I tried to see the UB7 and UB8, and also the Symmetrix/SDM patchs release notes to see if there is any correction for this issue. Also, maybe the SE version should be updated to correct this,
Anyone found the same issue ( point 2 ).?
Thanks in advance
No Events found!
BarryR1
16 Posts
0
July 23rd, 2010 07:00
Hi,
HF4801 should fix the 0% utilization-please apply it and let us know if it doesn't by opening a service request.
Its available on Powerlink.
-Barry
dynamox
9 Legend
•
20.4K Posts
0
July 23rd, 2010 04:00
I had a similar issue only that response times from Vmax would not show up in SPA, I did have the latest SE. The problem was resolved by updating Enginuity on Vmax to the latest code.