This post is more than 5 years old
1 Rookie
•
118 Posts
0
540
November 13th, 2008 07:00
MRLK
How to install MRLK on ecc host ?
and what will happen to the other SE previously installed on the ecc host ..
please if there is any steps for pushing the new agent ...
and what will happen to the other SE previously installed on the ecc host ..
please if there is any steps for pushing the new agent ...
No Events found!
seamuscoffey
472 Posts
0
November 13th, 2008 07:00
The first thing you need to do is download the latest Solutions Enabler Media Repository Load Kit (MRLK) from Powerlink - the latest version is 6.5.1 which can be found under Support > Software Downloads and Licensing > Downloads S > Solutions Enabler.
You then need to install it on the ControlCenter Server host - this will dump the relevant files into the media_rep folder so that thereafter you can push SE out to all the required Win/UNIX hosts via CC Console.
If there is a previous version of Solutions Enabler installed, the MRLK will install the newer version of Solutions Enabler to the same location as the older version of Solutions Enabler on the host machine. The install shield will display a default path for Solutions Enabler install. Disregard this location.
Regards,
Séamus Coffey
EMC Global Services
xe2sdc
2 Intern
•
2.8K Posts
0
November 13th, 2008 07:00
This thread is already moving ....