Master agent

Hi,

Use one of the methods mentioned in the 6.1 Planning and Install guide (available here https://support.emc.com/products/ControlCenter) from page 330 onwards to install the Master Agent on each hosts OS. The script for Installing the Master Agent is available on disk #4.

If you require the 6.1 installation disks they are available on powerlink as ISO images at the bottom of the page. Home > Support > Software Downloads and Licensing > Downloads C > ControlCenter v 6.x  

EMC highly recommends using a shared folder (or, in the case of UNIX, an NFS-mountable disk) to deploy the Master Agent, especially if you plan to run ControlCenter agents on many hosts. Instead of moving the installation disks from host to host, you can map a drive to the shared location on each host and deploy the Master Agent from there.

OR

Use the ControlCenter 6.1 Native Installation Packages available on powerlink to push out the agents

Download the ControlCenter 6.1 Native Installers from the EMC Powerlink website (registration required) at: http://Powerlink.EMC.com Home > Support > Software Downloads and Licensing > Downloads C > ControlCenter 6.x

Refer to Appendix D from the 6.1 Upgrade Guide and Appendix G from the 6.1 Planning and Install guide for complete instructions on the deployment of the Agents using the alternate methods for installing and uninstalling some ControlCenter Agents using Native Tools.

Regards
Conor Lawlor