This post is more than 5 years old
9 Posts
0
4043
August 14th, 2011 20:00
ECC Storage Scope Array Report - Local/Remore Replication LUNs
Hi EMC Team,
Good day!
May I have your thoughts on this?
We are using ECC Storage Scope Arrays Reporting to provide Report for an Array Capacities and its Usage but have noticed that on section "Details For All Arrays" #Local Replica LUNs: and #Remote Replica LUNs: only Display "0" value.
May I know how this information relate to CX Array SNAPView /Clone Local Replication configured in our Environment?
By the way our CX arrays has configured local replication via SNapview/Clone and RM 5.2.2 thus we are expecting some value on this section of Array Details.
I value your response.
Many thanks!
Don G
No Events found!
SarahXu1
59 Posts
0
August 16th, 2011 05:00
Local replica luns are for BCV devices and remote replica luns are for RDF2 and SRDF2, and also R21. They do not include snaps and clones. StorageScope does not fully support Clones. Clone devices are included in primary luns. For snaps, VDEVs are marked as "Virtual Primary".
Stephanie_P
180 Posts
0
August 15th, 2011 05:00
Hello, The team is going to move this thread tot he Support Forums Community where your question can be addressed.
Thanks,
Stephanie
devin_graham
14 Posts
0
August 15th, 2011 06:00
Hello Don,
Your question has been moved to the Clariion Support Forum. This will allow an expert to give you a timely answer.
Thank You,
Devin
devin_graham
14 Posts
0
August 15th, 2011 11:00
Hello all,
This Has Been Moved To The Ionix Forum
Thanx Glen
From,
Devin
kelleg
4.5K Posts
0
August 15th, 2011 11:00
As this is a question about ECC/Ionix, it would be better to move this question to the Ionix forum.
glen
dongonzales10
9 Posts
0
August 15th, 2011 20:00
Thank you Guys for moving this query to correct channel.
Here I attached the ECC PDF Array report for your reference.
As I had mentioned above, please refer to Array Details on each page and focus on the following:
1. # Primary LUNs:
2. # Local Replication LUNs:
3. # Remote Replica Primary LUNs:
Just want to know how I relate these figures to our current CX Array with Snapview/Clone LUN (RM) and wondering why our Value is Zero where we have LUNs with RM Replication Clone Group.
Hoping to get feedback soon.
Regards,
Don
1 Attachment
Arrays.zip
AnuShivnath
41 Posts
1
August 16th, 2011 06:00
We don't support replica reporting for Clariion arrays. You should expect replica information for Clariion in the future releases of ProSphere.
dongonzales10
9 Posts
0
August 16th, 2011 19:00
Hi SarahXu,
Thanks for the great information.
Would you mind sharing if we have any document telling that it won't support CX replica LUN info?
Again, thank you so much.
Regards,
Don
dongonzales10
9 Posts
0
August 16th, 2011 19:00
Hello AnuShivnath,
Thank you so much for sharing.
It's a great info but how about for Ionix future release?
Best regards,
Don
dnorton1
74 Posts
1
September 1st, 2011 10:00
ProSphere is the external name for the replacement product for ECC. You may have heard this referred to as "SRM 7" before. Customers with ECC under maintenance are entitled to ProSphere for free. ProSphere capacity reporting will fully support CLARiiON/VNX replicas.
Dan