This post is more than 5 years old
1 Rookie
•
73 Posts
0
1121
May 8th, 2011 11:00
ECC PM Vs Analayzer
Hello ,
I'm trying to find a way monitoring my new CX, ECC already in place , can i use ECC performance manager to monitor my CX as well as the LUNs under that array the same like Sym?
If i used ECC then master agent & navi (Both will be installed) !?
Is there is any advantages of Analayzer than the ECC to be used in Clarrions ?
Thanks,
No Events found!
SKT2
2 Intern
•
1.3K Posts
0
June 10th, 2011 20:00
navi anlalyzer is designed specifically for Clariion and it can get you data at deeper level when data logging enabled. I do use PM, but as far as i know it cant get all the data which analyzer can capture.
seamuscoffey
472 Posts
1
May 9th, 2011 05:00
Hi,
Yes, you can use Performance Manger to monitor the Clariion CX array. You will first need to discover the array in ControlCenter Console via the Storage Agent for Clariion. The agent can only be installed if Solutions Enabler and Navisphere CLI are already depoyed on the target host. In order to collect performance data, Statistics Collection has to be enabled via Navisphere Manager. Please see the EMC Ionix ControlCenter 6.1 Planning and Installation Guide Volume 1 for more information (search for 'Plan for Storage Agent for Clariion').
I am not familiar with Navisphere Analyzer so I'm not in a position to compare it to Performance Manager.
Regards,
Seamus Coffey
Customer Support Services