This post is more than 5 years old
1 Rookie
•
40 Posts
0
394
January 20th, 2009 06:00
ECC 5.2.0.5.49 and 'new' SUN T5220 hardware
my T5220 hardware has 8 core 1.2 Ultraparc T2 processors
it is also Solaris 10
however ECC thinks it has 64 cpus
everything else is reporting OK
the rest of the hardware/software is being reported OK
the HBAs are being detected but ECC topology is displaying no paths to my connected CX380,
a storage Relationship shows the correct LUNS and the storage is being used OK so it's not a zoning issue
I have other Solaris 10 boxes and they are OK
do I need a patch ? (I cant find any reference to one)
yes I know I should move to ECC 6 but that is not possible for a few months
any ideas ?
cheers
Alick
it is also Solaris 10
however ECC thinks it has 64 cpus
everything else is reporting OK
the rest of the hardware/software is being reported OK
the HBAs are being detected but ECC topology is displaying no paths to my connected CX380,
a storage Relationship shows the correct LUNS and the storage is being used OK so it's not a zoning issue
I have other Solaris 10 boxes and they are OK
do I need a patch ? (I cant find any reference to one)
yes I know I should move to ECC 6 but that is not possible for a few months
any ideas ?
cheers
Alick
No Events found!
seamuscoffey
472 Posts
0
January 20th, 2009 09:00
The last patch released for the Host Agent for Solaris at SP5 was Patch 4124 - this upgrades the Host Agent to 5.2.0.5.114. However, I'm not sure if that will fix the issue at hand (I've had a cursory look at the Readme)
Path Details issues can often be caused by a fabric not being fully discovered.
SP5 is End-of-Service-Life on Jan 31.
Regards,
Séamus Coffey
EMC Global Services