This post is more than 5 years old
2 Intern
•
204 Posts
0
663
May 7th, 2007 07:00
EmailXtender in connection with DX
Hi there,
I installed EmailXtender 4.8 and DiskXtender 6.1 and "watched" while in DX the "media groups" and "move rules" are created automatically by EX. Unfortunately, the rules are not set to "direct read", which according to the DX installation guide should happen.
As there is little to configure in DX, what else needs to be done?
Thanks and best regards,
Jochen Köcher.
I installed EmailXtender 4.8 and DiskXtender 6.1 and "watched" while in DX the "media groups" and "move rules" are created automatically by EX. Unfortunately, the rules are not set to "direct read", which according to the DX installation guide should happen.
As there is little to configure in DX, what else needs to be done?
Thanks and best regards,
Jochen Köcher.
No Events found!
fschlupp
397 Posts
0
May 10th, 2007 16:00
HKEY_LOCAL_MACHINE\SOFTWARE\OTG\EmailXtender\RecordParms
Kenta
11 Posts
1
May 10th, 2007 13:00
Alternatively I believe there is a registry key, althought I have not verified this under 4.8, which you can adjust. If you put in a support call I'm sure they'd be happy to walk you through this procedure. It will only affect new move groups.
jskoecher
2 Intern
•
204 Posts
0
May 11th, 2007 00:00