This post is more than 5 years old
8 Posts
0
848
April 16th, 2010 13:00
DXA file loading on running domain
Hello!
I would just like to know if it's possible to load a new (modified) dxa file while the INCHARGE-SA domain is still running?
Thank you very much for your time.
Best regards,
Isabelle.
No Events found!
FredericMeunier_0588be
143 Posts
0
April 19th, 2010 07:00
Hi Isabelle,
yes, this is possible. Just change one of the parameter's value associated to the domain type (smoothing interval for ex.), and then apply and start a reconfigure (SAM).
HTH,
--Fred
== APG5 ReportPack4Event for Smarts can report on millions of notifications in seconds ==
Frederic Meunier
Solutions Watch4Net Inc
APG & Smarts InCharge integration
http://www.watch4net.com
isabellecda
8 Posts
0
April 19th, 2010 07:00
Thank you Frederic.
I had tried this procedure before but didn't wait long enough to see the results.
Thank you very much for your time.
Isabellle.