This post is more than 5 years old
33 Posts
0
2139
October 20th, 2015 17:00
XtremIO + Recoverpoint Install Help
Hello,
I seem to be stuck in the RP installation and was hoping to get some clarification. The installation guides don’t mention that I have to do anything different for deploying RP with XIO and tell me to follow the VNX deployment process. Unfortunately, I can’t seem to get past the EMC Unishpere/Navisphere login credentials piece (Am I suppose to see this screen?). I put in the information for the XtremIO storage controllers but it always fails. Am I supposed to use the Recoverpoint installation option and not the Recoverpoint for VNX option? What am I missing?
No Events found!
Idan
675 Posts
0
October 21st, 2015 06:00
Yes, you have probably ran the RP/SE installer for VNX. You would need to run the RecoverPoint installer - it won't ask for the XMS/SCs IPs.
Regards,
Idan Kentor
RecoverPoint Corporate Systems Engineering
fadliz
153 Posts
0
October 21st, 2015 06:00
Yes, use the RP Installer (not VNX).
Thx,
Zahid Fadli
EMC2
Mobile: +17347170033
Twitter: @zDataGuy
From: Cbuhler
Reply-To: "jive-249630833-ot9-2-jj6q@emc-ecn.hosted.jivesoftware.com "
Date: Wednesday, October 21, 2015 at 8:21 AM
To: Zahid Fadli
Subject: - XtremIO + Recoverpoint Install Help
ECN
XtremIO + Recoverpoint Install Help
created by Cbuhler in RecoverPoint - View the full discussion
forshr
2 Intern
•
1.1K Posts
0
October 21st, 2015 07:00
Yes, use the latest DM version and the RP Installation option as opposed to RP/SE.
Regards,
Rich Forshaw
Consultant Corporate Systems Engineer - RecoverPoint & VPLEX (EMEA)
Data Protection and Availability Solutions
EMC Europe Limited
Mobile: +44 (0) 7730 781169
E-mail: richard.forshaw@emc.com
Twitter: @rw4shaw
EMC Europe Limited
Registered in England with Company No. 00990752 Registered office address: Level 1, Exchange House, Primrose Street, London C2A 2EG
The information contained in this e-mail message and any files transmitted with it are confidential. It is intended only for the addressee and others authorised to receive it. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are advised that you have received the e-mail in error; please delete it and notify the sender immediately. You should not retain the message or disclose its contents to anyone. Any disclosure, copying, distribution or action taken in reliance on the contents of the e-mail and its attachments is strictly prohibited.
CBuhl
33 Posts
0
October 22nd, 2015 08:00
The cluster is now deployed, but I'm unable to register the vXMS with Recoverpoint using the rp_user. It errors out immediatly However, It works fine if I put in the XIO admin user. From what I have read, only the rp_user will have access to the snapshots that are created.
When I put admin user, works right away.
fadliz
153 Posts
0
October 24th, 2015 06:00
Did you setup a passwd for the rp_user?
Sent from my iPhone
CBuhl
33 Posts
0
October 25th, 2015 09:00
Yeah, I got it working now. The documentation says I can change the password from the GUI, but i had to use the CLI. Thanks!
fadliz
153 Posts
0
October 25th, 2015 16:00
Correct. If you are logged in to the gui as tech user, then you can set the rp_user passwd.
Thanks
Sent from my iPhone