This post is more than 5 years old
2 Intern
•
614 Posts
0
5876
March 23rd, 2015 10:00
System Limit Exceeded error Recover Point
Hi All, I keep getting this error. i am a newbie on Recover Point. What can I do about this?
Thanks!
Admingirl
Time: Mon Mar 23 16:22:46 2015
Time Zone: GMT
Topic: MANAGEMENT
Scope: NORMAL
Level: ERROR
Event ID: 1035
Cluster: CENTURYLINK
Global links: None
RPA: RPA 2
Groups: simhyper-v
Summary: System limit exceeded
Details: Lag (in seconds): Current value is 31 (Limit is 25)
Service Request info: N/A............................................
No Events found!
forshr
2 Intern
•
1.1K Posts
0
March 23rd, 2015 13:00
Correct screenshot. CG link policy.
admingirl
2 Intern
•
614 Posts
0
March 23rd, 2015 10:00
Thank you so much Ankur!
ankur.patel
2 Intern
•
286 Posts
0
March 23rd, 2015 10:00
Seems as though someone has et the data lag field to 25, so anytime it goes above that number you will get an error. Assuming you are on RP 4.x you can go to the CG -> (copy) -> copy policy and change the value. This means that your RPO is greater than 25 seconds so the data from the journal Is not getting into the replica fast enough. If your companies stated RPO is not 25 seconds then this number should be adjusted.
ankur.patel
2 Intern
•
286 Posts
0
March 23rd, 2015 14:00
Please see forshr's reply below, my screenshot was incorrect. It should be the link policy not copy policy. Thanks Richard
admingirl
2 Intern
•
614 Posts
0
March 23rd, 2015 15:00
Thank you!