Unsolved
This post is more than 5 years old
11 Posts
0
1444
August 5th, 2016 06:00
RP4VM Event Filters
So while working with our SAN team that manages the RP/SE side of things we talked about the various event filters they have defined and various eventid's that have been setup to be ignored. So I proceeded to put in place a similar configuration on our RP4VM side. Things configured with no problem and now we are receiving email notifications as we intended. However, there are a few additional event id's that have been rolling in that I would like to ignore. Taking a look over the plugin as well as the CLI commands I see now way to actually update an existing event_filter or even show existing event_filters.
Am I overlooking something? Were would I get a list of existing event_filters that have been defined and after that how would I go about updating an existing filter in RP4VM?
Thanks.
wooody_collins
11 Posts
0
August 10th, 2016 10:00
For others information. If you want to update an event_filter in RP4VM there is no user side CLI command available nor does the vCenter plugin have any access. You can go to https:// /classic log in using the admin account and then edit the event_filter configurations using the web management interface that isnt mentioned any were in the documentation (that I have found).
Idan
675 Posts
0
August 11th, 2016 00:00
Hi there,
Currently, the supported methods to create/modify an event filter is through the CLI with the commands create_event_filter and edit_event_filter as well as REST.
Regards,
Idan Kentor
RecoverPoint Corporate Systems Engineering
idan.kentor@emc.com
Thoppay
20 Posts
0
October 10th, 2016 07:00
I find it useful to configure the log forwarding to VMware Log Insight and managing it from there.