This post is more than 5 years old
8 Posts
0
1331
June 27th, 2014 10:00
RecoverPoint : Insufficient paths from RPA2 to SP-B on array were detected
Hi,
I'm getting an error in RecoverPoint "Insufficient paths from RPA2 to SP-B on array were detected" because of this I could not upgrade RPAs from 4.0.x to 4.1.
Please help me to solve this issue.
Thanks,
Velan
No Events found!
kumaravel1978
8 Posts
0
October 27th, 2014 08:00
We found the issue with SPA and SPB paths. SPA's paths were connected to fabric A, the same way SPB's paths were connected to fabric B. It is a wrong configuration. So, we reconfigured SPA and SPB paths as SPA's paths connect fabric A and B the same way SPB after we reconfigured the error have gone.
kumaravel1978
8 Posts
0
June 27th, 2014 11:00
Hi Rich,
It is RP/SE and is working fine but still I'm getting this error this error. Now I'm unable to upgrade it says I should fix first this error.
Thanks,
Velan
forshr
2 Intern
•
1.1K Posts
0
June 27th, 2014 11:00
Hi Velan,
An RPA needs to see a minimum of one path per SP on the array. Please check that this is the case.
That said, can you confirm what flavour of RP this is, i.e. is it RP/SE or full RP?
Regards,
Rich
forshr
2 Intern
•
1.1K Posts
0
June 27th, 2014 12:00
Are you using vRPA's?
kumaravel1978
8 Posts
0
June 30th, 2014 04:00
Those are physical RPAs and connected to array through fiber channel.As long as those are working good with this error. But this error pop up when I try to upgrade to 4.1 and not let me to go further.
forshr
2 Intern
•
1.1K Posts
0
October 27th, 2014 08:00
Good to know Velan as often I answer questions or offer solutions but don't get to hear back if they worked or resolved the issue.
Regards,
Rich