This post is more than 5 years old
1 Rookie
•
23 Posts
0
6168
February 24th, 2015 14:00
RecoverPoint for VM - Maintenance Mode error
Hi,
following installation of recover point for VM 4.2P1, I am unable to protect any VM as I get the following error:
Action cannot be committed because the system is in maintenance mode - wait for the system to exit maintenance mode then try again.
I am using a trial license.
Anyone seen this before?
No Events found!
fadliz
153 Posts
0
February 24th, 2015 15:00
Hi,
Did Deployment Manager complete successfully? Was the RPVM cluster connected to another cluster and did that process fail?
To exit maintenance mode, ssh to the vRPA and login using the admin account and execute: finish_maintenance_mode
Thanks,
EMC2
Twitter: @zDataGuy
maxsven
1 Rookie
•
23 Posts
0
February 25th, 2015 05:00
Hi Fadliz
Did Deployment Manager complete successfully? YES
Was the RPVM cluster connected to another cluster and did that process fail? NO
To exit maintenance mode, ssh to the vRPA and login using the admin account and execute: finish_maintenance_mode
Yes that did the trick.
I do not understand why the RPAs where in maintenance mode initially...
maxsven
1 Rookie
•
23 Posts
0
February 25th, 2015 05:00
Hi Ori,
Thank you, will send you an eMail soon.