This post is more than 5 years old
2 Intern
•
227 Posts
0
1975
September 12th, 2013 06:00
Recoverpoint CLI, SRM Maintenance mode
I'm looking for the command to toggle between the following two options in the recoverpoint UI:
I want to switch to group is in maintenance mode back to group is managed by SRM. I believe I have the syntax correct for group is managed by SRM:
set_policy group=MILVMFS12_0543 managed_by_srm=SRM_managed
but when I issue:
set_policy group=MILVMFS12_0543 managed_by_srm=SRM_disabled
it actually changes the option to NONE vs maintenance mode.
No Events found!
forshr
2 Intern
•
1.1K Posts
0
September 13th, 2013 08:00
Hi there,
The three options are:
When SRM_disabled, the group is not managed by SRM.
When SRM_managed, the group is managed by SRM. RecoverPoint can only monitor. User-initiated RecoverPoint capabilities are disabled and VMware SRM support is enabled.
When RecoverPoint_managed, the group is managed by RecoverPoint and is in maintenance mode. SRM can only monitor. User-initiated RecoverPoint capabilities are enabled and VMware SRM support is disabled.
Regards,
Richard
duhaas1
2 Intern
•
227 Posts
0
September 13th, 2013 08:00
What will allow me to put it into maint mode in SRM?:
Is there any option that lets me put it into maint mode under SRM? If i'm understanding you correcting, when I use Recoverpoint_managed it puts it into maint mode under recoverpoint?
forshr
2 Intern
•
1.1K Posts
0
September 13th, 2013 11:00
Can you clarify what you mean by maintenance mode in SRM as these are all RecoverPoint CG options. Alternatively if you can clarify what you would like to achieve that would also help.
duhaas1
2 Intern
•
227 Posts
0
September 16th, 2013 08:00
I'm trying to udnerstand what CLI option will put the management mode into maintenance mode whn using SRM:
Screenshot
duhaas1
2 Intern
•
227 Posts
0
September 16th, 2013 09:00
Thanks, I'll have to verify, I felt like when I did that option, it actually moved it to :
forshr
2 Intern
•
1.1K Posts
0
September 16th, 2013 09:00
This refers to the third option that I stated, which is that RecoverPoint is able to manage the CG but SRM cannot.