This post is more than 5 years old
5 Posts
0
1476
July 14th, 2013 00:00
Recover Point SE replication change from FC to IP
Hello,
I have 2 RPs in one site connected to VNX 5100 and 2 RPs in other site connected to VNX 5300 Unified replicating each other through FC.
I would like to change the replication from FC to IP.Could some one help me with the correct procedure for the same.
Thanks and Regards,
Muhammed Basheer MP
No Events found!
forshr
2 Intern
•
1.1K Posts
0
July 15th, 2013 08:00
Hi Muhammed,
This is possible as an online process using the RP Deployment Manager Tool Modification Wizard. It can also be achieved using boxmgmt with careful consideration.
Regards,
Richard
ankur.patel
2 Intern
•
286 Posts
0
July 14th, 2013 20:00
Muhammed RP to a site can be either FC or IP. This is configured when RP is installed. To switch from FC to IP a reinstall is required. You can export the save_settings , do the reinstall, then import the save_settings.
You may want to reach out to you EMC Project Manager to have a delivery resource assist.
ankur.patel
2 Intern
•
286 Posts
0
July 15th, 2013 17:00
Thanks Richard for correcting me.
Muhammed_Bashee
5 Posts
0
July 17th, 2013 23:00
Thanks Ankur.patel and forshr for replying
Thanks and Regards,
Muhammed Basheer