This post is more than 5 years old
2 Posts
0
2676
October 15th, 2015 14:00
Issues adding RecoverPoint ArrayManagers to SRA with SRM6.0
Hi, guys!
I'm trying to add an ArrayManager to SRM 6.0 and I'm getting the error:
My environment is:
Protected Site
RecoverPoint MGMT: x.x.x.22
RPA1: x.x.x.23
RPA2: x.x.x.24
RPA3: x.x.x.25
Recovery Site
RecoverPoint MGMT: x.x.x.1
RPA1: x.x.x.2
RPA2: x.x.x.3
RPA3: x.x.x.4
- At Recovery Site I can add the ArrayManager based on any recover Point IP address (listed above)
- At Protected Site I can add the ArrayManager pointing only for x.x.x.25 (RPA3), for the 3 others receive that error.
- If I add both arrays (based on x.x.x.25 IP address) I can enable the ArrayPair
but I can't create any ProtectionGroup, because the arrayPair is grayed.
I already tried configure SRA HTTPs, using c:\Program Files\VMware\VMware vCenter Site Recovery Manager\external\perl\bin\perl.exe” command.pl –useHttps true , and it does not work.
I'll appreciate any help.
Products Version:
EMC RecoverPoint 4.1
SRM 6.0
vCenter 6.0
SRA 2.2.0.3
tks
Jairovisks1
2 Posts
0
October 19th, 2015 06:00
Thank You for reply,
Actually I needed disable http at RPAs, I followed this steps:
-Log into the RPA with the boxmgmt account
-option 2 setup
-option 8 advanced options
-option 2 security options
-option 1 web server mode
And I left only HTTPS enabled. So I could add ArrayManagers.
Thanks
fadliz
153 Posts
1
October 16th, 2015 17:00
It seems a bit odd that you can add the RPA cluster based on one of the RPAs and not the other even though they are on the same subnet. Is there a FW that might be blocking based on IP address/port?
I know you tried the HTTPS, but you might want to try to enable http on the RPAs (using boxmgmt > advanced > security options) temporarily to see if that helps.
RP Team
Sent from my iPhone
fadliz
153 Posts
1
October 16th, 2015 17:00
To add to my previous comment, the https shouldn't be an issue with this SRA version, but enabling http on rp would totally eliminate that.
Also what exact RP version are you using?
Sent from my iPhone