This post is more than 5 years old
2 Intern
•
522 Posts
0
1132
October 24th, 2016 06:00
GEN6 FC Port Layout
Hi Guys,
Can someone confirm the FC port layout on the new GEN6 hardware? I see GEN4/5 in the guides and have the GEN6 training material, but I'd like to confirm is the FC port layout goes right-to-left as 0/1/2/3 like the GEN5 does since this has changed in the past?
Is it correct to assume that this FC IO Module will always be shipped inserted into Slot 0 on the RPA upon unboxing?
Thanks!
-Keith
No Events found!
forshr
2 Intern
•
1.1K Posts
0
November 3rd, 2016 05:00
Hi Keith,
Unlike the Gen5 but like the Gen4, the ports are 0-1-2-3 from left to right on the HBA card and numbered as such.
Regards,
Rich
echolaughmk
2 Intern
•
522 Posts
0
November 2nd, 2016 12:00
Hi Guys - any thoughts on this?
thanks!
forshr
2 Intern
•
1.1K Posts
0
November 2nd, 2016 13:00
Hi Keith,
Short answer is yes, slot 0.
Regards,
Rich
echolaughmk
2 Intern
•
522 Posts
0
November 2nd, 2016 18:00
Thanks Rich - the FC ports still go 0-3 from right to left on the HBA right?
thanks!
echolaughmk
2 Intern
•
522 Posts
0
November 3rd, 2016 17:00
you rock...thanks Rich!