PSU info in racadm for 1-PSU servers?

Hello,

I cannot find information about PSU with command "racadm hwinventory" on poweredge R2xx servers (currently i test on R230, but before i tried same with older models). While i can successfully gather that info on R3xx servers with racadm hwinventory command.

Do i miss something? Is there any way to get info about PSU in R2xx servers (in my case R230)?

Example of PSU info rom R340 server:

[InstanceID: PSU.Slot.1]
Device Type = PowerSupply
DetailedState = Presence Detected
DeviceDescription = Power Supply 1
EffectiveCapacity = 350
FQDD = PSU.Slot.1
FirmwareVersion = 06.08.0F
InputVoltage = 208 Volts
InstanceID = PSU.Slot.1
LastSystemInventoryTime = 2021-09-08T14:50:49
LastUpdateTime = 2022-02-11T15:26:45
LineStatus = High line
Manufacturer = DELL
Model = PWR SPLY,350W,RDNT,LTON
PMBusMonitoring = Capable
PartNumber = XXXXXXXXX
PrimaryStatus = OK
Range1MaxInputPower = 432 Watts
RedMinNumberNeeded = 1
RedTypeOfSet = N+1,Load BalancedN+1768
RedundancyStatus = Fully Redundant
SerialNumber = XXXXXXXXXXX
TotalOutputPower = 350 Watts
Type = AC