Third party pcie nvme on Precison 7820

Question

Hello

I've red several post about nvme on Precision 7820 but i didn't found my information.

I have installed Intel SSD 750 Series in my pc.

I can install win 10 in Legacy mode .

In UEFI mode, disk is not is not seen : i'm asked to load driver.

Is there something to set on bios ?

Thanks

Chino de Oro · Accepted Answer

Download and extract this driver onto a USB drive.  During Windows installation asking to load driver, browse to the USB and select VROC driver.  That should allow NVMe drive be visible for selection.

rbxlio · Answer

@Chino de Oro​  Hello Thanks for your idea : unhappily none of 2 drivers solve my issue.

Chino de Oro · Answer

Reload the driver twice may make it sticks.

Rain_HH · Answer

How To Load The Intel Rapid Storage Technology Driver To Install An Operating System On An NVMe Storage Drive

rbxlio · Answer

Hello

I've tried several time to load the driver : no disk is found by win 10.

When I set to Legacy, nvme is displayed on bios:

If i choose UEFI, no disk is displayed.

Can somebody know why ?

I decided ton continue win 10 installation and load driver :

After a while, computer hang : bsod

Am i the one people with this issue ?

Regards

Chino de Oro · Answer

You are loading the incorrect driver.  There are 2 drivers being extracted, use the other one.

rbxlio · Answer

@Chino deOro I apologise : that work the third loading. Thanks Another question : Do you know why pcie disk is not displayed when I choose UEFI on boot sequence ?

Chino de Oro · Answer

Maybe Legacy boot with option ROM allows the storage controller be seen. In UEFI boot mode, drives that connected to RAID storage controller was not visible to Windows installer until the controller itself is visible and the drives that connected behind it. But that was not always the case, some installations being done in RAID mode without F6 drivers.

Precision Fixed Workstations

Third party pcie nvme on Precison 7820

Was this post helpful?