4 Posts
0
2975
November 5th, 2021 17:00
Precision 3600 - Just stopped - now has 1 2 3 on front panel ??
Having some problems with an older T3610 workstation (2013). Today it just stopped working...
When I boot it - I do not hear any post beeps - the machine lights up '4' and then '3', '4' - then the amber '2' is lit. Then the hard drive icon blinks for a minute - then '1', '2', '3' amber lights come on in the front panel - and the machine just sits there...
Any thoughts as to what is going on? I checked the manual and it says that 1, 2, 3 is reserved... Which does not tell me a lot...
The machine has a Xeon processor, mirrored 3TB opsys drive and 32 GB of memory.
Bradley MacDonald
brad_AT_timeacct_DOT_com
No Events found!
mazzinia_
4 Operator
•
1.4K Posts
1
November 6th, 2021 03:00
So by what I can read :
4 : bios checksum invalid
3.4 : ram configuration in progress
2 : pci configuration in progress
1.2.3 : Indicates routine system activity subsequent to video initialization
Have you ever changed the cmos battery ? if not, try to change it and lets see if it solves it
TimeAcct
4 Posts
0
November 7th, 2021 09:00
Hello Mazzinia. Thank you very much. That was indeed part of the problem.
When I replaced the battery - it would boot further. The raid 1 setup was gone - and then both hard drives failed... However, as this was just a media server - I was able to get Windows re-installed and the media server up and running fairly quickly.
Much appreciate you taking the time to reply.
As a thank you - check out www.disktriage.com - send us an email - and I will happily give you an Expert level license. Best tool (at least I think so) for analyzing your windows storage (or anything Windows can read). Just send an email to either sales or support! Have a great day!
Bradley MacDonald
mazzinia_
4 Operator
•
1.4K Posts
0
November 7th, 2021 10:00
Oh, thank you very much (and happy of having been of help)
TimeAcct
4 Posts
0
November 11th, 2021 19:00
Mazzinia,
I have replied to your email twice - and I am not sure you got it. This last time I got an error on the email
Do you have another email address? I would like to deliver that license key to you.
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its recipients. This is a permanent error.
The following address failed:
*******@tin.it
(I removed your actual email address)
mazzinia_
4 Operator
•
1.4K Posts
0
November 12th, 2021 02:00
Hello,
I don’t know why the other email is acting up… it’s the main national provider here. I should have used gmail to play safer, I guess, but the other was closer to the username of the forum so...
email sent
Alessandro
TimeAcct
4 Posts
0
November 13th, 2021 13:00
I have just sent the registration to the new email - let me know if you have any issues getting it.
mazzinia_
4 Operator
•
1.4K Posts
0
November 13th, 2021 16:00
Hi,
no issues at all. Again, thank you very much.