2 Posts
0
430
December 5th, 2022 12:00
Cooling for Tesla T4
Hi, I have a question regarding Dell Precision T5810. I need to install a Tesla T4 in the mentioned workstation, and I bought a DC brushless fan for cooling the GPU. However, it has a 2-pin female header and certainly will not fit in the 4-pin male slot of the motherboard. Any solution I may try? Thank you for reading
No Events found!
sam55todd
2 Intern
•
243 Posts
0
December 5th, 2022 23:00
2 pin PC fans are normally using just Ground and +12V for power
4 pins adds tachometer output and PWM input.
you can simply use available 2 pins in a regular 4-pin jack after modifying your connector a bit (just make sure you connect right pinout) and ignore the rest.
Or as someone has suggested below - get +12V from SATA power via relevant adapter.
DELL-Cares
Moderator
•
27.3K Posts
0
December 5th, 2022 12:00
Hello, I see you are looking for technical assistance. If you need our help, you can start a private message with us and we will be happy to assist you.
Chino de Oro
9 Legend
•
8.1K Posts
0
December 5th, 2022 12:00
You can use a SATA power fan cable.
khoatran94
2 Posts
0
December 5th, 2022 12:00
Hi, I have a question regarding Dell Precision T5810. I need to install a Tesla T4 in the mentioned workstation, and I bought a DC brushless fan for cooling the GPU. However, it has a 2-pin female header and certainly will not fit in the 4-pin male slot of the motherboard. Any solution I may try? Thank you for reading