SAS Port Failed on Dell SAN MD 3220i

Dear Sir,

   Due battery loss we have Replaced RAID Controller Module 0, card but after replaced RAID Controller Module 0 we are getting below error on RAID Controller Module 1.
So can you please suggest me for the solutions.

 

Storage array:  IMS_MD3220i_2
Port reporting problem:   RAID Controller Module 1, Physical Disk Channel 1, Port: 0
Status: SAS Port Failed

Physical Disk interface: SAS
Channel: 1
Port: 0
Part type: LSISAS2116 revision 223,036,928
Status: Failed
Maximum data rate: 6 Gbps
Current data rate: Not available

Physical Disk interface: SAS
Channel: 2
Port: 0
Part type: LSISAS2116 revision 223,036,928
Status: Up
Maximum data rate: 6 Gbps
Current data rate: 6 Gbps

---

Also I have tried with below command but no luck by run below command.

smcli IP -c "clear allPhysicalDiskChannels stats;"
smcli IP -c "set physicalDiskChannel [1] status=optimal;"
smcli IP -c "set physicalDiskChannel [2] status=optimal;"
smcli IP -c "set physicalDiskChannel [3] status=optimal;"
smcli IP -c "set physicalDiskChannel [4] status=optimal;"