AL13SXL600N 0WPJY9 Firmware

Question

Hi Im looking for the firmware for AL13SXL600N 0WPJY9. but no joy. i thought it would be in Nautilus but its not. Any ideas? Thanks

DellEMCSupport · Accepted Answer

Hello tapelibraryfixer, Here is the link to the firmware. It covers the TOSHIBA AL13SX Series SAS 15K RPM 2.5 600GB https://dell.to/3jKerFG

DellEMCSupport · Answer

Hello tapelibraryfixer, The Dell part# WPJY9 is for a Poweredge T320, & R510.  You will find the firmware listed under those servers for that drive.

tapelibraryfixer · Answer

When i look for that part number the closest is AL13SXB600N

tapelibraryfixer · Answer

can this be added to nautilus?

DellEMCSupport · Answer

Hello tapelibraryfixer, You should be able to use the nautilus tool to upgrade the firmware on the drive.

tapelibraryfixer · Answer

only problem now is extracting the firmware lol

DiegoLopez · Answer

Hey @tapelibraryfixer,   Make sure to check this article: Dell Nautilus Firmware Update Utility: Bootable media for automatic Hard Drive updates   Hope this helps. Regards.

tapelibraryfixer · Answer

Hi i meant the firmware file. the 32bit was extractable through winrar, but the 64bit wasnt thanks

DiegoLopez · Answer

Hello again @tapelibraryfixer   What server do you have? and what method are you using for applying the update?   Regards.

tapelibraryfixer · Answer

i was using server 2008 std R2 64bit.but i got the firmware ok from the 32bit installer. basically i have a dell server just for upgrading disks, i want to be able to auto upgrade multiple disks at a time using nautilus.

DiegoLopez · Answer

So, just to make sure. You finally were able to extract the firmware from the 32bit installer right?   Regards.

tapelibraryfixer · Answer

correct. winrar was able to unzip as normal. i could unzip the 64bit with 7zip but the file structure was differant

PowerVault

AL13SXL600N 0WPJY9 Firmware

Was this post helpful?