1 Rookie
•
5 Posts
0
44
July 21st, 2025 18:43
power store single or dual parity check .
how to check if the dell power store is configure single or dual parity ?
No Events found!
1 Rookie
•
5 Posts
0
44
July 21st, 2025 18:43
how to check if the dell power store is configure single or dual parity ?
Top
Mwin2015
1 Rookie
•
2 Posts
0
August 7th, 2025 00:40
You can check it in GUI .
Origin3k
4 Operator
•
2.3K Posts
0
July 22nd, 2025 06:17
IIRC its not vissible within the PowerManager GUI and even with PowerStore CLI i didnt see a command.
You can create a support bundle and iam sure Dell Support can pull the info from that data.
Regards,
Joerg
DELL-Young E
Moderator
•
5.2K Posts
0
July 22nd, 2025 23:32
Hello, would this help?
https://www.dell.com/support/kbdoc/en-us/000188491/powerstore-how-powerstore-physical-capacity-is-calculated
This represents a group of drives acting as a single failure domain. An RRS can sustain either a single drive failure (DRE SP - Single Parity or Single Tolerance), or a dual drive failure (DRE DP - Double Parity or Double Tolerance).
Respectfully,
Origin3k
4 Operator
•
2.3K Posts
0
August 7th, 2025 04:44
@Mwin2015
nice!