This post is more than 5 years old
1 Rookie
•
36 Posts
0
1117
October 30th, 2006 05:00
Windows 2003 & PowerPath 4.5.0 eFIX Silent Install
Hello,
I'm trying to package silent installation of PowerPath.
EMCPP.W2003_32.4.5.0.GA.exe /s /v" /q LICENSENUM=%LICENSE% INSTALL_DRIVE=C NO_REBOOT=1" where LICENSE is License Number, works very well
but the same command line with EMCPP.W2003_32.4.5.0.EF1.GA.exe reboot the computer ...
How can I avoid this reboot using silent install for this eFIX ?
Thanks
Pierre-Francois
I'm trying to package silent installation of PowerPath.
EMCPP.W2003_32.4.5.0.GA.exe /s /v" /q LICENSENUM=%LICENSE% INSTALL_DRIVE=C NO_REBOOT=1" where LICENSE is License Number, works very well
but the same command line with EMCPP.W2003_32.4.5.0.EF1.GA.exe reboot the computer ...
How can I avoid this reboot using silent install for this eFIX ?
Thanks
Pierre-Francois
No Events found!
George Sanderson
5 Posts
0
October 30th, 2006 06:00
This issue has been fixed and will be part of the next release of PowerPath for Windows. In the meantime, use the following workaround:
Do not use NO_REBOOT=1 setup command line option during silent mode (non-interactive) upgrade from earlier PowerPath versions. Instead, use REBOOT=ReallySupress option in the setup command line.
Regards, George
dynamox
9 Legend
•
20.4K Posts
0
October 30th, 2006 07:00
will this solution work if PowerPath is being installed on a brand new box ? or just for an upgrade from an earlier version?
dynamox
9 Legend
•
20.4K Posts
0
November 6th, 2006 10:00
George Sanderson
5 Posts
0
November 6th, 2006 10:00