This post is more than 5 years old
1 Message
0
369
February 21st, 2007 13:00
using all pathways after installing license not working
After installing Powerpath 4.6 EF1 for Windows Server 2003 (32bit) I worked without a license for a short time and then installed one. Unfortunatelly I'm still only able to use the same pathways as before. All other pathways still show up as "unlicensed". I tried rebooting the machine, but that did not work.
Regards, Raoulst
Regards, Raoulst
No Events found!
Kiran3
410 Posts
0
February 23rd, 2007 05:00
powermt set policy
you can look up the syntax in powerpath documentation but in short you have to give a class parameter to specify what kind of devices (symm, clariion) you want to set the policy for..and then the policy
example command could be
powermt set policy=co class=clariion dev=all (for clariion devices)
powermt set policy=so class=symm dev=all (for symmetrix devices)
save settings after the change using powermt save
that should work...
dynamox
9 Legend
•
20.4K Posts
0
February 22nd, 2007 03:00
powermt check_registration