This post is more than 5 years old
2 Posts
0
4072
January 31st, 2012 20:00
I have a question about hitachi storage use a power-path
I have a question about hitachi storage use a power-path.
Can Hitachi Storage use a EMC Power-path with EMC Clariion storage under same host?
If this is avaiable, can I see the path information by powermt display's command?
No Events found!
Brion2
154 Posts
0
February 2nd, 2012 05:00
PowerPath can manage EMC and supported non-EMC storage. In some cases, customers want to use PowerPath to manage EMC storage and another MPIO solution to manage non-EMC storage on the same host. That is supported on most operating systems. I would recommend reviewing the PowerPath Administration and Installation Guide for your OS to confirm.
Thanks, Brion
Brion2
154 Posts
1
February 1st, 2012 04:00
Hi. If it is a supported model, you will be able to see all managed PowerPath devices in the powermt display output.
A complete list of supported EMC and non-EMC arrays can be found here:
PowerPath:
https://elabnavigator.emc.com/vault/pdf/EMC_PowerPath.pdf
PowerPath/VE:
https://elabnavigator.emc.com/vault/pdf/EMC_PowerPath_VE.pdf
Thanks, Brion
sonicman
2 Posts
0
February 1st, 2012 16:00
Thanks for your reply. Additional question~
Is it possible to share the Power-path software without trouble under the unlike storages(hitachi,emc)?