This post is more than 5 years old
18 Posts
0
946
August 2nd, 2016 08:00
Rebuild/Rebalance Traffic
This is our current environment:
ScaleIO v2.0-6035.0
Windows 2012 r2 datacenter
vcenter 6.0.0, 3634793
(4) esxi 6.0.0 3620759
How do I verify the rebalance/rebuild traffic uses a specific vmic5 and vSwitch1?
No Events found!
pawelw1
306 Posts
1
August 5th, 2016 05:00
Hi Roger,
If you use IP Roles, check what IPs are set for SDS-only and then check whether appropriate vNICs are assigned to the ScaleIO-Data2 Port Group.
You can also try to run some rebuilds and monitor pNICs activies on ESXi level - either with "esxtop" or "esxcli network nic stats get -n vmnic5" on that box.
Hope that helps!
Best,
Pawel
roger001
18 Posts
0
August 5th, 2016 07:00
esxtop works perfect!
roger001
18 Posts
0
August 5th, 2016 07:00
Were do I find info about the IP roles; can I assume the user guide? I will go look. Thanks./
pawelw1
306 Posts
0
August 7th, 2016 23:00
Hi Roger,
Yes, the IP roles are described in the User Guide under Architecture/Networking section.
cheers,
Pawel