This post is more than 5 years old
2 Posts
0
5573
July 5th, 2016 13:00
No boot device found error on R610 after OS installed
Hi
So I configured Raid 1, installed Windows server 2012 R2 from USB. But when the system reboots after installation is complete it says there us no boot device available. I tried to manually boot from the raid controller but still says the same thing. The boot is BIOS.
I'd appreciate it jf you could help me to vet this up and running.
Thanks
Feri
No Events found!
feritala
2 Posts
0
July 6th, 2016 01:00
Hi Robert
Thanks for your message, I resolved the issue
The boot sequence was set correctly and I also tried to boot from the RAID directly, the problem was the firmware. I updated all firmware and that fixed the problem.
Thanks for your help
Farshad
rder
1 Message
0
June 18th, 2018 06:00
Here are some guidelines to fix this error. These are very easy guidelines where you can simply follow the step to fix the error. follow the link to fix this error. Tap Here