Boot configuration data for your PCis missing

Hello all, 

I am having issue to repair my system on PE R430, windows server 2012 standard 64bit, the system is returning the following error :

Your PC need to be repaired

The boot configuration data for your PC is missing or contain errors,

File:\Boot\BCD

Error code: 0xc000000f

you will need to use recovery tools on your installation media etc...

 

so I went to IDRAC then upgrade firmware for Raid controller , that I have Perc H330 Mini , and it's now successfully updated 

so I checked the storage status in Dell everything seems to be fine , 

it seems to be OS drive crashed, now when I am booting from OS media from lifecycle controller it's proceeding but if I need to repair windows it's not detecting any drive !

all drives are not available from windows DVD media in order to repair my windows ,

running windows is server standard 2012 64bit, 

I tried this steps from article below which is exactly my issue but unfortunately it didnt work  

https://www.dell.com/support/article/in/en/indhs1/sln49038/dell-poweredge-how-the-load-the-perc-drivers-during-windows-2003-2008-or-2012-installation?lang=en#1  

as per the article below from rad firmware I should get file name : PERC H330 Adapter (F:\payload\PercSas3.inf)    

but the updated firmware has only one file in payload called FW0005i.rom windows server is unable to detect any driver if I click on this 

 

any reply or help would be highly appreciated