1 Rookie
•
6 Posts
0
51
July 1st, 2025 02:49
R620 Recently Logged Storage Events
Hi there
I’m just wondering can i clear log from perc h710mini or not because i see it appear many times, even though i have deleted the log in server -> log. It just not disappear. 
No Events found!
DELL-Young E
Moderator
•
5.1K Posts
0
July 1st, 2025 07:09
Hello,
Storage recent logs do not come from SEL, but from LCC. LCC logs are by design meant to be persistent. If you need to clear them you have to use system retire/repurpose process
But do note that it will wipe all your historical data.
https://www.dell.com/support/kbdoc/en-au/000198190/how-to-repurpose-or-retire-system-lifecycle-controller-feature
PowerEdge: How To Repurpose or Retire a system using the LifeCycle Controller
Let us know if you have any further questions.
Respectfully,
DELL-Young E
Moderator
•
5.1K Posts
0
July 1st, 2025 03:54
Hello, thanks for choosing Dell and welcome to our community.
Is it that you have 4 physical disks, but only two are recognized? Have you removed them or are they not properly plugged into the slots?
Respectfully,
Duyduc111
1 Rookie
•
6 Posts
0
July 1st, 2025 04:08
@DELL-Young E
Hi,
Thank you for your reply.
I only have 2 physical disks installed, not 4.
Previously, there was an error on one of the virtual disks, so I deleted the virtual disk configuration. After that, the PERC controller automatically recreated the VD.
Since then, the error log has remained in the Storage Summary and doesn’t go away, even though the system is now running normally.
Best regards,
DELL-Young E
Moderator
•
5.1K Posts
0
July 1st, 2025 04:26
Hello,
I think you can try clearing SEL.
https://www.dell.com/support/contents/en-us/videos/videoplayer/poweredge-how-to-view-or-clear-the-system-event-log/6363597437112
PowerEdge: How to View or Clear the System Event Log | Dell US
The video has sections for different iDRAC versions.
Respectfully,
Duyduc111
1 Rookie
•
6 Posts
0
July 1st, 2025 04:45
@DELL-Young E
Thanks for the suggestion.
I’ve already tried clearing the System Event Log (SEL) via iDRAC and RACADM, but the storage-related logs in the “Storage Summary” view are still present.
Do you have any recommendations for clearing those persistent logs from the PERC H710 controller?
Duyduc111
1 Rookie
•
6 Posts
0
July 1st, 2025 09:13
@DELL-Young E thank for your support i will test that way.
DELL-Young E
Moderator
•
5.1K Posts
0
July 2nd, 2025 06:25
Hello also executing racadm command works, might I add.
Respectfully,