1 Rookie
•
1 Message
0
585
September 25th, 2024 08:29
'Third party and is disabled' log question.
Hi !
Today i tried to connect 25G link but when i insert the SFP28 SFP with Convertor.
Occured log message as below and interface is not coming up.
Dell EMC (OS10) %EQM_MEDIA_PRESENT: Media inserted . Media SFP28 25GBASE- (QSA) in slot:1 port:1 serianumber:M0114231002222 is third party and is disabled
also, i configured command as below for using 3rd tranceivers
interface breakout 1/1/1 map 25g-4x
allow unsupported-transceiver
unlock third-party transceiver
when i inserted 10G SFP+ into same interface it was working very well.
Someone know the reason ? why 25G SFP28 is not working.
(Acturally i inserted 25G SFP for 30km DWDM)
Here is the information for Dell Switch
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2021 by Dell Inc. All Rights Reserved.
OS Version: 10.5.3.0
Build Version: 10.5.3.0.44
Build Time: 2021-10-06T23:03:55+0000
System Type: S5232F-ON
Architecture: x86_64
very happy for any advice.
Thanks
DELL-Chris H
Moderator
•
9.4K Posts
0
September 25th, 2024 13:21
Mung10,
Based on page 7 of the guide here you see it doesn't list the 25g directly,
The S5200F-ON Series switch includes:
● S5212F-ON: twelve 25GbE SFP28 ports and three 100GbE QSFP28 ports
● S5224F-ON: twenty-four 25GbE SFP28 ports and four 100GbE QSFP28 ports
● S5232F-ON: thirty-two 100GbE QSFP28 ports and two 10GbE SFP+ ports
● S5248F-ON: forty-eight 25GbE SFP28 ports, four 100GbE QSFP28 ports, and two 200GbE QSFP-DD ports
● S5296F-ON: ninety-six 25GbE SFP28 ports and eight 100GbE QSFP28 ports
but the 100G ports would support 25G, so the issue is likely the use of a 30km distance transceiver, which might be the problem instead of using a short range..
Let me know if this helps.